Flow applied, 0.8 – 1.5mm thick epoxy resin based floor topping

Uses

Nitoflor SL1000 is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. It provides a dense, impervious, coloured and chemically resistant floor surface which is hygienic and easy to clean. Typical applications include:

 Clean rooms
 Kitchens
 Plant rooms
 Light industrial plants

Advantages
 Fast application – minimises downtime
 Chemically resistant – good resistance to a wide range of chemicals
 Durable – good abrasion resistance
 Hygienic – provides a dense, impervious, seamless floor surface which is easily cleaned
 Attractive – available in a wide range of colours to enhance the working environment.

Description
Nitoflor SL1000 consists of graded aggregates bound in a pigmented epoxy resin binder. It is supplied as a two component system, pre-weighed for on-site mixing.
When laid, it provides a smooth, light-reflective surface. It is available in a range of standard colours.

Specification
Flow-applied epoxy floor topping
The designated floor areas shall be surfaced with Nitoflor SL1000, a 0.8 – 1.5mm mm thick floor-applied epoxy resin floor topping. The topping shall achieve a min. compressive strength of 50 N/mm2 and a flexural strength of 25 N/mm2 at 7 days when tested to BS6319. At 35°C, it shall be capable of accepting foot traffic at 24 hours and vehicular traffic at 48 hours.

Properties
The values given below are average figures achieved in laboratory tests. Actual values obtained on site may show minor variations from those quoted.